Vu+
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Black Hole 3.0.8 Vu+ Uno4K SE

Discussion in 'Vu+ Uno4K SE Black Hole Images' started by Ev0, Dec 24, 2018.

  1. Ev0

    Ev0 Administrator

    Messages:
    2,598
    MERRY CHRISTMAS FROM THE BH TEAM

    Black Hole 3.0.8

    What is new ?

    • Many bug fixes
    • Added Serviceapp with Exteplayer3
    • New Bootlogo
    • Updated Mediatree to support more USB tuners
    • Updated Duo4K Drivers
    1.png

    2.jpg

    3.jpg

    4.jpg

    5.jpg

    6.jpg

    7.png

    8.jpg

    9.jpg

    10.jpg

    This Image has the latest drivers but CAN be installed in OpenMultiboot. The image does not need to be installed in flash.

    This latest version of the Black Hole series has been updated and improved for maximum stability and performance.

    Please note that of all images Black Hole now has the best epg system:

    - Integrated OpenEpg

    - CrossEPG supported

    - EPG Import supported



    Main functions of the buttons on the remote

    OK button = Skin with simple information

    OK button x 2 = Extra Info Skin

    Blue button = Black Hole Blue Panel

    Blue button and then Red button = Black Hole Epg Panel

    Blue button and then Yellow button = System Monitor Panel

    Blue button long press = Extensions

    Yellow button = Audio menu

    Green button = Black Hole Green Panel

    Green button long press = Subservices

    Green button and then Red button = Fast Plugin Setup

    Green button x 2 = Fast Plugin

    Button Red short press= access HbbTv functions

    Button Red long press= Red Panel (Parallel Universes Teleportation)

    Addons

    Green button and then Yellow button takes you to:-

    Dedicated server for BlackHole addons

    Download and install additional packages from the Black Hole server

    Infobar / OSD

    Analog Clock Gui

    Channel orbital location

    Advanced Tuner Info: Sr Freq Pol Fec

    Signal SNR, BER

    Infobar picons

    Characteristics of BlackHole Panels

    Blue Panel

    Extra Settings

    Black Hole Speed Up

    Black Hole Cron Manager (Manage schedules)

    OSD Settings (OSD configuration)

    Devices Manager

    Usb Format Wizard

    Kernel Modules Manager(Kernel module operator)

    Inadyn Settings (Configure Inadyn)

    Swap File Settings (Configure File Swap)

    Hard Disk Settings (Configure Hard Drive)

    OpenVPN Panel ( OpenVPN Panel)

    Samba / CIFS Panel ( Samba Panel)

    NFS Server Panel ( NFS server Panel)

    Telnet Panel ( Telnet Panel)

    FTP Panel ( FTP Panel)

    UPnP Client Djmount

    UpnP Server Minidlna

    Pcsc Panel

    Tuner Server

    Network Browse & Mountpoints

    Info Panel

    1 - Gui Setting (Gui configurations)

    2 - Service Information (information system)

    3 - About (info)

    Memory (Memory)

    Space (capacity)

    CPU (processor)

    Process (process)

    EPG Panel

    Global settings (global settings EPG)

    Setting Provider (ISP settings)

    Green Panel

    Fast Plugin Setup (Configure quick access to your favourite plugin)

    Fast Plugin (Access your favourite plugin)

    Addons (added)

    Addons Download Manager (Manager for package downloading)

    Online Feeds Settings update

    Online Black Hole image update

    Manual Install BH packges (Manual installation of Black Hole packages)

    Manual Install IPK packages (Manual installation of IPK packages)

    Addons Uninstall Panel (Uninstalled packages)

    Black Hole Statistics (See connections, top downloads and more)

    Characteristics of BlackHole Panels

    Red Panel

    BH Parallel Universe Teleportation

    BlackHole

    Avalon

    Chaos

    Ghost

    ServiceApp and Exteplayer3 are both external plugins, and are not part of the BH image, therefore any users that do not want / need to use these plugins, can remove them via the BH SpeedUp panel.

    Credits:


    Thanks to MX3L for ServiceApp https://github.com/mx3L/serviceapp/tree/develop

    Thanks to SamSamSam for Exteplayer3 https://github.com/e2iplayer/exteplayer3

    Thanks to dpeddi for patching ServiceApp and Exteplayer3 to work on BH.


    Thanks to Pedro_Newbie for Backup script.

    Thanks to the group of Beta Testers.

    Thanks to Rytec for providing us with the server with all epg.dat files.

    Thanks to MaxZ4 for Integrated EPG loader.

    Thanks to Skaman for Cross EPG

    Thanks to Lukkino (VDR-Italy) for the source code of OpenTV.

    Thanks to Reinh@rd for the file satellites.xml.

    Thanks to Littlesat and Pli Team for the original autolanguage and subtitle options code

    DISCLAIMER

    THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

    THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

    LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.

    LICENSE (TERM OF USE)

    THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

    ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.

    This is free hobbyist software and it comes with absolutely no warranty. Use it at your own risk.
     

    Attached Files:

    galoxas, ricardo555, jojo15x and 12 others like this.
  2. Ev0

    Ev0 Administrator

    Messages:
    2,598
    BH 3.0.8 onwards includes ServiceApp and Exteplayer3 which gives improved media playback / streaming performance.

    It is pre-installed in all boxes, except Gen1 Solo, Duo, Uno, Ultimo and Zero, so you will have to enable it from the BH SpeedUp menu on those boxes.

    To use it with IPTV, you can either leave the ServiceApp settings as default and in your IPTV lists, just change the #SERVICE 1:0:1: or #SERVICE 4097:01: to #SERVICE 5002:0:1:

    Doing this, Exteplayer3 will only be used on your IPTV streams.

    Or you can change the default setting of Enigma2 playback system in the ServiceApp menu from Original to Exteplayer3.

    Note: that you can not record IPTV streams if you are using Exteplayer3 (however Enigma2 isn't reliable when recording IPTV anyway).

    Changing the setting in the ServiceApp menu, means that the image will no longer use the built in Mediaplayer (linked to Gstreamer) and will use ExtePlayer3 for all media playback for IPTV and streaming aswell as any movies / recordings on your hdd, doing this you won't need to convert your IPTV lists to #SERVICE 5002:0:1:

    11.jpg

    12.jpg
    But please note, that ServiceApp isn't perfect, it does not know the difference between Mpeg1 and Mpeg2 files, therefore it will report any Mpeg2 as Mpeg1 and the Zerok4K and Duo4K do not support Mpeg1, so even though these files are really Mpeg2 because ServiceApp reports them as Mpeg1 you will only get Audio on these files.

    All other Vu+ boxes support Mpeg1 so it's not too much of an issue.

    Also note that Subtitles will not work and trying to use Subtitles with Exteplayer3 may cause Enigma2 to crash, this is a known issue, and it is not something we can fix.
     
    118092, alikhavari, Meloki and 3 others like this.
  3. didi21

    didi21 Vu+ Newbie

    Messages:
    14
    nice job thank you
     
  4. syx0621

    syx0621 Vu+ Newbie

    Messages:
    4
    thank you for sharing
     
  5. Khalil ammareh

    Khalil ammareh Vu+ Newbie

    Messages:
    69
  6. drbmn

    drbmn Vu+ Newbie

    Messages:
    11
    Thanks for the great job.. Is this stb (uno 4K se) with this new image compatible with the multistream channels on 5°W?? Tuner is S2X, so It should be I guess.
    Thanks
     
  7. Matrix10

    Matrix10 Administrator

    Messages:
    8,832
    At this point, only Zero 4K is able to receive MIS channels.
     
    drbmn likes this.
  8. kodosh23

    kodosh23 Vu+ Newbie

    Messages:
    5
    Thanks for the hard and excellent work! Happy Holidays!
     
  9. essencestudios1956

    essencestudios1956 Vu+ Newbie

    Messages:
    7
  10. waleedaboyasmen

    waleedaboyasmen Vu+ Newbie

    Messages:
    10
  11. adam13

    adam13 Vu+ Newbie

    Messages:
    23
    Hello Ev0.
    How can I change the #SERVICE 4097:01: to #SERVICE 5002:0:1 in my iptv list?
    Thank u very much .
     
    linuxsat2525 likes this.
  12. drbmn

    drbmn Vu+ Newbie

    Messages:
    11
    Thanks for reply. But Do you think that will be possible in near futre?? It's just a software problem or it's a hardware limitation??? Thanks.
     
  13. bogdanm

    bogdanm Moderator

    Messages:
    2,190
    Use editor?
    Im used notepad++ ; is very easy becouse is option "change" in he you write 4097 to 5002 and editor change all.
     
    adam13 likes this.
  14. adam13

    adam13 Vu+ Newbie

    Messages:
    23
    Hello.
    I have Notepad++ but how can I do it?
    I have the iptv list open in a window of my computer, where to start?
    Thank u.
     
  15. bogdanm

    bogdanm Moderator

    Messages:
    2,190
    Next find option " Find " in notepad after this rooldown and you see option "Change " [ CTRL +H ] .
    In next window you find this whot you look.
     
  16. adam13

    adam13 Vu+ Newbie

    Messages:
    23
    Hello Bogdanm.
    I'm here. Thank u very much my friend.
     

    Attached Files:

  17. Meloki

    Meloki Vu+ Newbie

    Messages:
    13
    Thanks ;)
     
  18. linuxsat2525

    linuxsat2525 Vu+ Newbie

    Messages:
    4

    copy gstplayer on usr / bin chmod 755
    and fi the command

    Code:
    ln -sfn gstplayer /usr/bin/gstplayer_gst-1.0

    [​IMG]
     

    Attached Files:

  19. bogdanm

    bogdanm Moderator

    Messages:
    2,190
    In whot this help ?
     
  20. Thomas67

    Thomas67 Vip

    Messages:
    400
    How do you create your Boquets? Do you use some plugin to convert your playlist to Enigma2 Boquets?

    Some plugin like JediMakerExtream and E-Channelizer gives you the option to chose when creating boqutes what player you want to use.
    If one does not work just make new with other settings. But almost all IPTV Channels works just fine with DVB1 intsead of 4097,5001or5002

    And the nice thing with using DVB1 when creating boquets is that EPG is much easier to setup since epg id is generated same as Satchanels.

    E-Channelizer free version gives you the option to change.edit and add on your computer then upload to your STB
     
    adam13 likes this.

Share This Page