BlackHole Vu+ Ultimo 1.6.6

Discussion in 'Vu+ Ultimo Black Hole Images' started by lorenzo64, Nov 5, 2011.

Users Viewing Thread (Users: 0, Guests: 0)

Thread Status:
Not open for further replies.
Page 1 of 2

  1. lorenzo64 Administrator

    BlackHole Vu+ Ultimo 1.6.6



    - New Skin Rihanna 5 by Matrix10
    - Extended Hdmi-Cec functions (thanks to Meo, Pieterg & Sjaaky)
    - Crossepg updated from https://github.com/organizations/E2OpenPlugins (thanks to skaman)

    Based on official image 6.0:
    Open Embedded
    - Add WebBrowser plugin
    - Add UI postion control plugin
    - Add 3D framebuffer control plugin
    - Add remote control system code control plugin

    - For details, please take a loot at git log.

    Driver update

    20111103(beta)
    - improve DVB-C/T tuning
    - Fix incorrect display of DVB-C/T SNR/AGC
    - Fix high-bitrate problem in CI
    - Support 3D framebuffer
    - Add interface for UI position setup
    - Add redundant fpga device at /dev
    - Add ioctl for hdmi_cec(get physical/logical addr.)
    - Fix audo mute in pass-through
    - Add interface to set the system code of the remote control
    - Add interface to disable REC VFD icon
    - Add interface to control global alpha



    backdrop.jpg
    about.jpg
    esterno_bis.jpg
    interno.jpg

    ultimo2.jpg
    ultimo3.jpg


    WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot.
    The image MUST be installed in the flash.
    Black Hole can not support images not installed in the flash.

    This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.

    Please note that of all images Black Hole now has the best epg system:
    - Integrated OpenEpg
    - Rytec dedicated epg.dat
    - New system epg.dat outside.
    This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space.
    Community members can then download it from our servers.
    This feature provides other benefits such as:
    Increase download speed of EPG
    Download EPG from any channel
    Schedule the download of EPG decoder even during standby
    Users can customize the providers using Add / Remove function

    Main functions of the buttons on the remote

    OK button = Skin with simple information
    OK button x 2 = Extra Info Skin
    Blue button = Black Hole Blue Panel
    Blue button and then Red button = Black Hole Epg Panel
    Blue button and then Yellow button = System Monitor Panel
    Blue button long press = Extensions
    Yellow button = Time Shift
    Green button = Black Hole Green Panel
    Green button long press = Subservices
    Green button and then Red button = Fast Plugin Setup
    Green button x 2 = Fast Plugin
    Button Red = Start Record

    Addons

    Green button and then Yellow button takes you to:-
    Dedicated server for BlackHole addons
    Download and install additional packages from the Black Hole server

    Infobar / OSD

    Analog Clock Gui
    Channel orbital location

    Advanced Tuner Info: Sr Freq Pol Fec
    Signal SNR, BER
    Infobar picons

    Characteristics of BlackHole Panels
    Blue Panel
    Extra Settings

    Black Hole Cron Manager (Manage schedules)
    OSD Settings (OSD configuration)
    Devices Manager
    Black Hole HDMI Cec
    Manager Kernel Modules (Kernel module operator)
    Inadyn Settings (Configure Inadyn)
    Swap File Settings (Configure File Swap)
    Hard Disk Settings (Configure Hard Drive)
    Black Hole Mount Wizard (Mount points)
    OpenVPN Panel ( OpenVPN Panel)
    Samba / CIFS Panel ( Samba Panel)
    NFS Server Panel ( NFS server Panel)
    Telnet Panel ( Telnet Panel)
    FTP Panel ( FTP Panel)
    Usb Tuner Panel
    UPnP Client Djmount
    UPnP Server Mediatomb

    Info Panel
    1 - Gui Setting (Gui configurations)
    2 - Service Information (information system)
    3 - About (info)
    Memory (Memory)
    Space (capacity)
    CPU (processor)
    Process (process)

    EPG Panel
    Global settings (global settings EPG)
    Setting Provider (ISP settings)

    Green Panel

    Fast Plugin Setup (Configure quick access to your favourite plugin)

    Fast Plugin (Access your favourite plugin)

    Addons (added)
    Addons Download Manager (Manager for package downloading)
    Installation manual packages (Manual installation of Black Hole packages)
    Manual Install IPK packages (Manual installation of IPK packages)
    Addons Uninstall Panel (Uninstalled packages)
    Black Hole Statistics (See connections, top downloads and more)

    Credits
    Thanks to the group of Beta Testers.
    Thanks to Rytec for providing us with the server with all epg.dat files.
    Thanks to MaxZ4 for Integrated EPG loader.
    Thanks to Skaman for Cross EPG
    Thanks to Lukkino (VDR-Italy) for the source code of OpenTV.
    Thanks to Reinh@rd for the file satellites.xml.
    Thanks to bigroma (vuplus-community board) for rt3070 patches.


    DISCLAIMER

    THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

    THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

    LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR IILEGAL PURPOSES SUCH AS CARD SHARING.

    LICENSE (TERM OF USE)

    THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

    ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.

    Attached Files:

    lorenzo64, Nov 5, 2011
    #1
    Luar, Egon, el_zari and 21 others like this.

  2. wf_m65 Vu+ Newbie

    welcome ultimo,thanks guys
    wf_m65, Nov 5, 2011
    #2

  3. breakdown Vu+ Newbie

    thanks for the best image
    breakdown, Nov 5, 2011
    #3

  4. DanielFran BH Lover

    Thanks BH Team!

    I want an Ultimo too! :)
    DanielFran, Nov 5, 2011
    #4

  5. Don Andres BH Lover

    Yeah Baby Yeah :)
    Can't wait to put my fingers on the new stylish Ultimo remote .
    Thx alot to BH team for the Best VU+ support
    Don Andres, Nov 8, 2011
    #5

  6. Docctore Vu+ Newbie

    Great New.
    Enigma 2 for Vu Ultimo!!!
    Docctore, Nov 14, 2011
    #6
    pappaalfio likes this.

  7. looza Vu+ Newbie

    HI Guys
    I just tried your Image on my Ultimo ( sample Box). Funny thing, the actual RCU Part of the Remote do not work at all. I can work a bid with the keyboard part but with no color **** its just bad.
    Have you experienced similar probs? Trying to switch RCU Code in RemoteControl Code plugin results in a green screen.

    I hope you have an idea
    Looza
    looza, Nov 28, 2011
    #7

  8. колбаскин Vu+ Newbie

    I tried to update the image, everything is ok
    Rebooted the receiver, but now it will not boot?
    Installed with the usb receiver in a flash
    Need to update the bootloader or something else? :wallbash:
    колбаскин, Dec 4, 2011
    #8

  9. angelofsky1980 BlackHole Drivers Coder

    Have you an Ultimo box in your home?
    angelofsky1980, Dec 4, 2011
    #9

  10. колбаскин Vu+ Newbie

    Well, I'm not just asking
    I wrote that the updated image on this and now the receiver will not boot
    колбаскин, Dec 4, 2011
    #10

  11. angelofsky1980 BlackHole Drivers Coder

    Ok.
    At this time, it's relevant the output with serial nullmodem cable....
    angelofsky1980, Dec 4, 2011
    #11

  12. колбаскин Vu+ Newbie

    [IMG]

    Here is the inscription on the screen and all ...
    So you need to do to the image loaded?
    колбаскин, Dec 4, 2011
    #12

  13. колбаскин Vu+ Newbie

    Code:
    RC2=00000017

BL=00000004
RC1=00000006
RC2=00000018

BL=00000005
RC1=00000005
RC2=00000018

BL=00000006
RC1=00000001
RC2=00000014

BL=00000007
RC1=00000002
RC2=00000015
3
COPY CODE
A567

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: Wed Oct 12 13:13:03     2011 (doliyu@doliyu_note)
Copyright (C) Broadcom Corporation.

writing vfd
brcm_dbox_vfd_init ..
reverse_byte ..0xe0
reverse_byte ..0x7
New NAND flash at 00000000 offset 00000000 size 509952KB
New NAND flash at 00000000 offset 1F200000 size 4096KB
New NAND flash at 00000000 offset 1F600000 size 4096KB
New NAND flash at 00000000 offset 1FA00000 size 2048KB
New NAND flash at 00000000 offset 1FC00000 size 1024KB
New NAND flash at 00000000 offset 1FD00000 size 512KB
New NAND flash at 00000000 offset 1FD80000 size 512KB
New NAND flash at 00000000 offset 1FE00000 size 1024KB
New NAND flash at 00000000 offset 1FF00000 size 1024KB
New NAND flash at 00000000 offset 20000000 size 520192KB
New NAND flash at 00000000 offset 3FC00000 size 4096KB

DDR Freq:      396MHz
CPU speed:     405MHz
Memory Config: 64-bit UMA
Device Tech:   1Gb
Total memory:  512MB
Boot Device:   NAND
Total flash:   1024MB

Total memory used by CFE:  0x87000000 - 0x8705F460 (390240)
Initialized Data:          0x8704ACB0 - 0x8705AF50 (66208)
BSS Area:                  0x8705AF50 - 0x8705F460 (17680)
Local Heap:                0x8705F800 - 0x87A5F800 (10485760)
Stack Area:                0x87A5F800 - 0x87A61800 (8192)
Text (code) segment:       0x87000000 - 0x87012B2C (76588)

CFE driver build information:
LDR:     ELF   1; BIN   1; SREC  1
UI:      LEVEL 3; MIN   0
FS:      FAT   1; FAT32 1
NET:     STACK 1; ENET  1; TCP   0
USB:     STACK 1; ETH   1; DISK  1; SERIAL   1; HID 1
FLASH:   NAND
SPLASH:  2*1024*1024; flash0.splash

Initializing USB.
Initialize First USB Controller
 USB OHCI start : Power Switching Mode Changed from  2000902 to 2000b02
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
Try to Initialize Second USB Controller
Initialize Second USB Controller
 USB OHCI start : Power Switching Mode Changed from  2000902 to 2000b02
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

checking usb
Starting splash screen.
***************************************************
Found splash image - Width = 720 Height = 576
***************************************************
x = 0, y= 0, bmpMemory=85000000, surfaceMemory=ac800000, splashPitch=1440, splashWidth=720, splashHeight=576
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:mem=32M mem=256M@0x20000000 rootfstype=jffs2 root=/dev/mtdblock0 rw
Loading: 0x80001000/3693956 0x80386d84/144016 Entry address is 0x80362000
TP1 Entry Address at 0x80000ffc = 80362000
Starting program at 0x80362000

<5>Linux version 2.6.18-7.3 (amedeo@localhost.localdomain) (gcc version 4.4.3 (GCC) ) #1 SMP Fri Nov 4 12:43:09 CET 2011
Fetching vars from bootloader... OK (E,D,B,C)
Detected 512 MB on MEMC0 (strap 0x23540812)
Board strapped at 512 MB, default is 256 MB
g_board_RAM_size=512MB
Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1
CPU revision is: 0002a044
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
<6>Synthesized TLB refill handler (23 instructions).
<6>Synthesized TLB load handler fastpath (37 instructions).
<6>Synthesized TLB store handler fastpath (37 instructions).
<6>Synthesized TLB modify handler fastpath (36 instructions).
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
User-defined physical RAM map:
node [00000000, 02000000: RAM]
node [02000000, 0e000000: RSVD]
node [20000000, 10000000: RAM]
<5>Reserving 224 MB upper memory starting at 02000000
<7>On node 0 totalpages: 65536
<7>  DMA zone: 65536 pages, LIFO batch:15
<7>On node 1 totalpages: 65536
<7>  Normal zone: 65536 pages, LIFO batch:15
Built 2 zonelists.  Total pages: 131072
<5>Kernel command line: mem=32M mem=256M@0x20000000 rootfstype=jffs2 root=/dev/mtdblock0 rw console=ttyS0,115200
PID hash table entries: 4096 (order: 12, 16384 bytes)
Found MIPS counter frequency: 203 Mhz
Using 202.501 MHz high precision timer.
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 286336k/524288k available (2896k kernel code, 237704k reserved, 561k data, 148k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
plat_prepare_cpus: ENABLING 2nd Thread...
TP0: prom_boot_secondary: Kick off 2nd CPU...
CPU revision is: 0002a044
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
Synthesized TLB refill handler (23 instructions).
Brought up 2 CPUs
migration_cost=1000
NET: Registered protocol family 16
PCI->SDRAM window size: 512MB
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 32768)
TCP reno registered
brcm-pm: disabling power to USB block
brcm-pm: disabling power to ENET block
brcm-pm: disabling power to SATA block
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 22) is a 16550A
loop: loaded (max 8 devices)
brcm-pm: enabling power to ENET block
Broadcom BCM7413 P21 Ethernet Network Device v2.0 Nov  4 2011 12:41:42
Config Internal PHY Through MDIO: Auto-negotiation timed-out
: 10 MB Half-Duplex (assumed)
bcmemac: no PHY detected on EMAC_1, disabling
blackhole initialised
Broadcom STB NAND controller (BrcmNand Controller)
i=0, CS[0] = 0
NAND_CS_NAND_XOR=00000001
Enable XOR on CS#0
brcmnand_probe: CS0: dev_id=ecd35195
After: NandSelect=40000101, nandConfig=18152300
NAND Config: Reg=18152300, chipSize=1024 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
BrcmNAND mfg ec d3 Samsung K9K8G08U0A 1024MB

Found NAND: ACC=f7ff1010, cfg=18152300, flashId=ecd35195, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 1024MB @00000000
brcmnand_probe: CS0: dev_id=ecd35195
After: NandSelect=40000101, nandConfig=18152300
Found NAND chip on Chip Select 0, chipSize=1024MB, usable size=1024MB, base=0x
brcmnand_scan: B4 nand_select = 40000101
brcmnand_scan: After nand_select = 40000101
ACC_CONTROL for SLC NAND: f7ff1010, eccLevel=15
SLC flash: ACC_CONTROL = f7ff1010
page_shift=11, bbt_erase_shift=17, chip_shift=30, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 1024MB @00000000
mtd->oobsize=64, mtd->eccOobSize=16
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
brcmnand_default_bbt: bbt_td = bbt_main_descr
brcmnandCET: Status -> Deferred
        numchips=1, size=40000000
nandinfo->brcmnand.CS[0] = 0
bcm7XXX_nand_parts=80336f08, bcm7XXX_new_partition=80336bb8, bcm7XXX_old_partition=80336d50
numParts=9
Part[0] name=rootfs, size=1f200000, offset=0
Part[1] name=kernel, size=400000, offset=1f200000
Part[2] name=boot, size=400000, offset=1f600000
Part[3] name=splash, size=200000, offset=1fa00000
Part[4] name=cfe, size=100000, offset=1fc00000
Part[5] name=mac, size=80000, offset=1fd00000
Part[6] name=env, size=80000, offset=1fd80000
Part[7] name=nvm, size=100000, offset=1fe00000
Part[8] name=<NULL>, size=0, offset=1ff00000
Part[8] name=<NULL>, size=1fc00000, offset=20000000
Creating 9 MTD partitions on "bcm7xxx-nand.0":
0x0000000000000000-0x000000001f200000 : "rootfs"
0x000000001f200000-0x000000001f600000 : "kernel"
0x000000001f600000-0x000000001fa00000 : "boot"
0x000000001fa00000-0x000000001fc00000 : "splash"
0x000000001fc00000-0x000000001fd00000 : "cfe"
0x000000001fd00000-0x000000001fd80000 : "mac"
0x000000001fd80000-0x000000001fe00000 : "env"
0x000000001fe00000-0x000000001ff00000 : "nvm"
0x0000000020000000-0x000000003fc00000 : "<NULL>"
usbmon: debugfs is not available
ehci_hcd_brcm_init: Initializing 2 EHCI controller(s)
brcm-pm: enabling power to USB block
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
 - USB h/w setup mode <B>
 - USB power enable set for active HIGH mode
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-1)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
brcm-ehci-1 brcm-ehci-1.1: BRCM EHCI
brcm-ehci-1 brcm-ehci-1.1: new USB bus registered, assigned bus number 2
brcm-ehci-1 brcm-ehci-1.1: irq 57, io mem 0x10480500
brcm-ehci-1 brcm-ehci-1.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
 - Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3
brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
 - Resetting at b0480608
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4
brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480600
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Empty flash at 0x04b0fd1c ends at 0x04b10000
Empty flash at 0x04b10e78 ends at 0x04b11000
VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 148k freed

JFFS2 notice: (20) check_node_data: wrong data CRC in data node at 0x04b10800: read 0xd420bd23, calculated 0x21c4bd07.
mount: mounting sysfs on /sys failed: Device or resource busy
Startting the hotplug events dispatcher
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
brcm-pm: enabling power to SATA block
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42
scsi0 : sata_svw
ata1: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xb051001c
scsi1 : sata_svw
ata2: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xb051011c
done
modprobe: module nls_base not found in modules.dep
modprobe: module nls_cp437 not found in modules.dep
modprobe: module nls_iso8859-1 not found in modules.dep
i2c /dev entries driver
procmk_init
dvb_bcm7413: module license 'Proprietary' taints kernel.
DVB: registering new adapter (vuultimo)
enable MII = 0
Booted !
Booted !
bcm7335: hotplug_callback():
Hotplug - status.connected 0
[GPIO]Default
[GPIO]RST Default
[GPIO]fpga secu
[GP]:brcm_pwm_init

brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $
[VID]: <6>bcm7335_video_init
[AUD]: <6>bcm7335_audio_init
DVB: registering adapter 0 frontend 0 (Vuplus FE)...
DVB: registering adapter 0 frontend 0 (Vuplus FE)...
bcm7335: bcm7335_frontend_init(): vtuner1 : 3
[MPVR]: >> misc_pvr_init
input: dreambox advanced remote control (native) as /class/input/input0
[LCD]: registered
vfd reply error
    колбаскин, Dec 4, 2011
    #13

  14. angelofsky1980 BlackHole Drivers Coder

    You can tro to reflash your box....
    angelofsky1980, Dec 4, 2011
    #14

  15. колбаскин Vu+ Newbie

    Ask him to give, but the flash to boot?
    This image generally someone tried or posted not test the software?
    Will soon be prodavta these receivers and the people also have problems with booting

    What do I do now?

    I tried to flash again, the situation has not changed
    колбаскин, Dec 4, 2011
    #15

  16. angelofsky1980 BlackHole Drivers Coder

    The BH coder has been tested the image after the release.
    At this point there is the possibility your box is more recent like the one in hands of coder.
    You can also try one of the experimental images built by Vu+ avaiable at http://code.vuplus.com
    angelofsky1980, Dec 4, 2011
    #16
    колбаскин likes this.

  17. колбаскин Vu+ Newbie

    Thank Experimental software was normally loaded receiver
    If you have a real working image, I test
    While I can not advise people to fill the current version
    колбаскин, Dec 4, 2011
    #17

  18. Lekores Vu+ Newbie

    I were trying your SW, and I have same result. The receiver found image, begin update but after can not boot. :sad:
    Lekores, Dec 7, 2011
    #18

  19. BigEd Vip

    I did not know Ultimo is already out on shops
    Where did you buy it from? Which country?
    Can you take some pictures so we can see the final look?
    thanks
    BigEd, Dec 7, 2011
    #19
    kratos likes this.

  20. Lekores Vu+ Newbie

    I have test sample. I think what now you do not buy it. ... let wait and soon it will...And my sampl has not finish desing. Please look up photo of it .. :)
    Lekores, Dec 7, 2011
    #20
Page 1 of 2
Thread Status:
Not open for further replies.

Share This Page

Facebook: