Vu+
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Realtek rtl8188eu UPDATED driver for new Vu+ kernel

Discussion in 'Wireless Devices' started by angelofsky1980, Jan 17, 2015.

  1. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,882
    In this thread there is the IPK for all Vu+ boxes that contains Realtek rtl8188eu chipset.

    Installation instructions:
    PREREQUISITE for Solo2, SoloSE, Zero and Duo2 users:
    via telnet/SSH connection you must launch this command:
    Code:
    opkg remove kernel-module-r8188eu --force-depends
    After that, continue with the following steps:
    a) put the IPK into a USB pendrive and connect it to your box. You will have the possibility to install IPK directly.
    b) put the IPK into /tmp folder of your box and use the "Manual install IPK package" from BH Green Panel -> Yellow Button.

    Supported devices will be avaiable on the second post of this thread.

    Drivers will be avaiable on the third post of this thread after compilation for all supported boxes.
     
    Last edited: Jan 17, 2015
    gggabcsi and blade12 like this.
  2. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,882
    Supported devices taken from driver source code.
    If you have a device compatible with this driver but it's not listed here, open a support request here.
    Thanks

    Code:
            /*=== Realtek demoboard ===*/
            {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8179)}, /* 8188EUS */
            {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0179)}, /* 8188ETV */
            /*=== Customer ID ===*/
            /****** 8188EUS ********/
            {USB_DEVICE(0x07B8, 0x8179)}, /* Abocom - Abocom */
            {USB_DEVICE(0x0DF6, 0x0076)}, /* Sitecom N150 v2 */
            {USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
            {USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
            {USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
            {USB_DEVICE(0x056E, 0x4008)}, /* Elecom WDC-150SU2M */
    
     
    shasse, david90 and gggabcsi like this.
  3. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,882
    Vu+Duo / Vu+Solo / Vu+Uno / Vu+Ultimo / Vu+Solo2 / Vu+Duo2 / Vu+SoloSE / Vu+Zero IPKs
     

    Attached Files:

    josagi, david90, Mireto and 5 others like this.
  4. gggabcsi

    gggabcsi Vu+ Newbie

    Messages:
    5
    I can confirm, that driver is tested, exactly this device, below working without any issues!

    /*=== Realtek demoboard ===*/
    {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0179)}, /* 8188ETV */

    Thank you for the grate support.
     
    angelofsky1980 likes this.
  5. Kantila

    Kantila Vu+ Newbie

    Messages:
    2
    Hello,

    I have Vu+ Zero and Black Hole 2.1.5, i see in changelog :

    - WIFI: update driver RTL8188EU
    - WIFI: update driver RTL8812AU

    So if for example i want use one of those drivers :

    /*=== Realtek demoboard ===*/
    {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8179)}, /* 8188EUS */
    {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0179)}, /* 8188ETV */
    /*=== Customer ID ===*/
    /****** 8188EUS ********/
    {USB_DEVICE(0x07B8, 0x8179)}, /* Abocom - Abocom */
    {USB_DEVICE(0x0DF6, 0x0076)}, /* Sitecom N150 v2 */
    {USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
    {USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
    {USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
    {USB_DEVICE(0x056E, 0x4008)}, /* Elecom WDC-150SU2M */

    I need or not install IPK ?

    Thank's
     
  6. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,882
    Drivers should be already included into latest BH images.
     
  7. Kantila

    Kantila Vu+ Newbie

    Messages:
    2
    Thank you, so if y buy one of this USB KEY Wifi, they work already?
     
  8. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,882
    They should work out-of-the-box.
     
  9. shambar

    shambar Vu+ Newbie

    Messages:
    1
    after i select the wlan and scan the AP, i got the answer that there is on AP so connect. Im using dlink wifi on vu+ solo with black hole image. Any ideas?
     
  10. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,882
  11. Yurilla

    Yurilla Vu+ Newbie

    Messages:
    1
  12. usuario74

    usuario74 Vu+ Newbie

    Messages:
    23
    I try to remove it but I get the message:
    packages not removed
    telnet
    help?
    i have bh 3.0.2 e kodi....
     
  13. _james_

    _james_ Vu+ Newbie

    Messages:
    7
    Last edited by a moderator: Aug 12, 2016
  14. angelofsky1980

    angelofsky1980 BlackHole Driver Specialist

    Messages:
    16,882
    _james_ likes this.
  15. _james_

    _james_ Vu+ Newbie

    Messages:
    7
    Thanks @angelofsky1980 , yes is working fine on BH images, and with OpenBH?

    The only problem is that i cant add the real mac address + fixed IP to the router from that wifi pen WN725 v2.1

    see the images if i really can explain to you

    5555.jpg

    sddd.jpg

    so i cant add a real fixed IP do my zero and router, if i made any changes @ vuzero, always stay online/ative on my wifi network because the mac address is not the same.

    Why?


    Im using now Black Hole 3.0.2.F and 2.1.6 before
     
    Last edited: Aug 12, 2016
  16. Semml

    Semml Vu+ Newbie

    Messages:
    1
    thank you
     
  17. Giuseppe_80

    Giuseppe_80 Vu+ Newbie

    Messages:
    1
    Hi to everybody, yesterday i've installed BH 3.0.3-vuzero...I bought a inexpensive wifi usb dongle TL-WN725N_V2.2 ...Driver for chipset rtl8188eu have been included into all BH images but doesn't works properly...wifi works but with a really slow connection even if distance is 2 meter to the router. This is too slow to watch Videos, while with ethernet it goes very fast and with good quality.

    So, I run:
    opkg remove kernel-module-r8188eu --force-depends
    it sais that there aren't any package to remove.

    And after i run:
    opkg install rtl8188eu_git-r2-bh3_vuzero.ipk (ipk that you provided) and it sais:

    opkg_install_pkg: Package rtl8188eu md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.
    * opkg_install_cmd: Cannot install package rtl8188eu.

    What can I do? I've to buy another wifi dongle?
    What do you suggest?

    Thanks a lot.
     
  18. karurosu15

    karurosu15 Vu+ Newbie

    Messages:
    2
    It does not work for me in any blackhole version, can it be fixed?
     
  19. arnfs78

    arnfs78 Vu+ Newbie

    Messages:
    18
    Hi. I have vu+ zero 4k. Does it work with a WiFi adapter with rtl8188etv driver? Please help
     
  20. tamicia

    tamicia Vu+ Newbie

    Messages:
    86
    Ti sbagli:

    I driver sono gia presenti nella 3.0.8 sul mio Vu+solosev2 ma l'adattatore wifi non viene riconosciuto.
    Ho provato poco fa con la tl-wn725n ricevuta oggi con risultato negativo:
    - il comando "opkg remove kernel-module-r8188eu --force-depends" non rimuove nulla nonostante siano gia preinstallati.

    -se provo ad installare il driver che hai postato (per solose) non installa un bel nulla, come gia scritto un utente (Giuseppe_80) quasi 2 anni fa senza avere supporto:
    _install_pkg: Package rtl8188eu md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.
    * opkg_install_cmd: Cannot install package rtl8188eu

    PS: l'adattatore wireless รจ un v.3
     
    Last edited: Apr 12, 2019

Share This Page