Vu+
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Vu+ ULTIMO Firmware Upgrade

Discussion in 'Vu+ General HowTo & Guides' started by Mito, Aug 20, 2012.

  1. Mito

    Mito Administrator

    Messages:
    6,689
    Update FPGA v 4.5
    Fix High/low symbolrate channel scan problem.

    There are two ways to upgrade your box.
    One is using your USB memory stick and the other is upgrading directly from the internet.

    Option A) Using USB memory stick.
    1. Download the file named TS_PRO.dat_FPGA_4.5.zip attached to this post and unzip it.
    2. Copy the file TS_PRO.dat into USB memory stick.
    3. Attach USB memory stick to your box and restart. (or restart GUI)
    4. Goto FPGA plugin menu.
    5. Select the data file in USB memory stick and start 'Upgrade'.
    6. Restart your box.


    Option B) Upgrade directly from the internet
    1. Goto FPG plugin menu.
    2. Download the data file by pressing 'Blue' button.
    3. Select the downloaded data file and start 'Upgrade'.
    4. Restart your box.
     

    Attached Files:

    qwerty875, walid2010, Smurfik and 8 others like this.
  2. rocuelo

    rocuelo Vu+ User

    Messages:
    207
    sorry.. what means FPG ??
     
    adel sat likes this.
  3. scoot1690

    scoot1690 Vu+ Newbie

    Messages:
    46
    can anyone please confirm if this update is working i could not get it going from the downloads list (fpga)
     
    oratge and adel sat like this.
  4. >>Artorius<<

    >>Artorius<< >>English Admin<<

    Messages:
    1,607
    Thanks Evo, I could not get it to upgrade from the download.
    FTP'd the two files to tmp and upgraded from there.;)
     
    adel sat likes this.
  5. Ev0

    Ev0 Administrator

    Messages:
    2,702
    No probs, and thats the same way I did it in the end ;)
     
    adel sat likes this.
  6. malkom

    malkom Vu+ Newbie

    Messages:
    1
    You can find mdf file here :
    ULTIMO : h**p://archive.vuplus.com/download/fpga/vuultimo/4.5/
     
    adel sat likes this.
  7. rocuelo

    rocuelo Vu+ User

    Messages:
    207
    i try to do
    Option B) Upgrade directly from the internet
    1. Goto FPG plugin menu.
    2. Download the data file by pressing 'Blue' button.
    3. Select the downloaded data file and start 'Upgrade'.
    4. Restart your box.

    AND is a notice saying can't dwonload the checksum file....

    any idea why is happening??
     
    adel sat likes this.
  8. ilmago

    ilmago BH Lover

    Messages:
    625
    use the instructions posted by Mito...
    download the file from this thread and put in a usb pen, then update it choosing TS_pro.dat .
     
    bo-hlala likes this.
  9. denon54

    denon54 Vu+ Newbie

    Messages:
    89
    hello,

    i tried to do the upgrade on my ultimo using methode directly from internet,
    i follow the procedure and select the TS_pro.dat inside my /tmp.
    i confirmed and at the end got a message upgrtade successfull, the box restatr
    automatically at the end of the procedure, when it restart and that i go back to
    FPGA upgrade , when i tried to install again , i got the same file coming back,
    so my question is the upgrade went ok or do i have to do it again, because normally
    i shouldn't get the possibility to redownload again the same file if everything gone right?

    do you have a ny info about that,
    i also have to say that i use Black pole 0.1.3

    thank you
     
  10. ilmago

    ilmago BH Lover

    Messages:
    625
    at the moment is not possible to verify the version of the fpga installed as angelofsky1980 said in an other thread, but if you received a successfull message it means upgrade done.
     
    angelofsky1980 likes this.
  11. Don Andres

    Don Andres BH Lover

    Messages:
    172
    Have both files on a USB stick and have already updated my Ultimo with TS_Pro.dat file .
    *mtd5 is only 1 kb , so when I try to update this one as well , I got message " Can't found MD5 file " !
    Is it important på upgrade the * MD5 file and if so , where can I find a version bigger then 1 kb ?

    I guess without this upgrade HBBTV plugin is useless.
    After upgrading the TS_pro.dat file , HBBTV interface is still not working here ?
     
  12. lifax

    lifax Vu+ Newbie

    Messages:
    19
    thank you
     
  13. siksika

    siksika Vu+ Newbie

    Messages:
    19
    the * MD5 is a file cecksum, if you open it there will be a sequence of unknown numbers. in linux if you do "md5sum TS_PRO.dat" the result comes out to be equal to the * MD5 if it is different then the file is corrupt TS_PRO.dat.
    then the * MD5 should not be installed! so it is in linux I am new to this world, no matter if I'm wrong rorregetemi.

    sorry I translated with google
     
  14. Smurfik

    Smurfik Vu+ Newbie

    Messages:
    7
     
  15. Smurfik

    Smurfik Vu+ Newbie

    Messages:
    7
    Is it ok to do upgrate FPGA v4.5 if on my Vu+uno Enigma 2 or something like E2 ? Thanks
     
  16. Mito

    Mito Administrator

    Messages:
    6,689
  17. abdol_pi

    abdol_pi Vu+ Newbie

    Messages:
    18
    very thanks for FPGA v 4.5:yahoo::thanks:
     
  18. eng_gamal

    eng_gamal Vu+ Newbie

    Messages:
    8
    the best way upgrade from net directly it's more easy
     
  19. greenwon

    greenwon Vu+ Newbie

    Messages:
    6
    thank you very much, i like it, thanks
    it can help me
     
  20. Krazyk

    Krazyk Vu+ Newbie

    Messages:
    3
    Great guide worked first time! :) internet upgrade is the easy option :)
     

Share This Page