Vu+
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Vu+ Zero 4K - a second USB

Discussion in 'Hardware: All Vu+ models' started by PaPs, Apr 18, 2018.

  1. raboha

    raboha Vu+ Newbie

    Messages:
    20
    yes its me how work this probleme i try to splash_auto.bin with full hd 1920*1080 when he is bloked
    I think this problem is burning the usb port
    i try to work with 5 or 6 usb to flash it but there is no result
    For this I wanted to work on the USB port that is at the bottom of the device
     
  2. Thomas67

    Thomas67 Vip

    Messages:
    670
    You can not use bottom usb port for flashing purpuse. The port is a storage bridge and can only be used to attach an external USB HDD
    Port is working like an IDE/SATA Port with an USB connector only. Its an docking port for the PVR Kit you can buy as an extra function to your Zero 4K zapper.

    And you might want to read this test about the Zero 4K
    http://www.vuplus-community.net/board/threads/vu-zero-4k-tested-for-you.35663/

    And final... splash_auto.bin can only be in format 720x480 any other size want work.
     
  3. raboha

    raboha Vu+ Newbie

    Messages:
    20
    Does it mean that there is no other solution just JTAG ?
     
  4. Matrix10

    Matrix10 Administrator

    Messages:
    9,043
    My opinion
    KIT socket and Box socket is just an ordinary usb 2.0 ???? . Post 1

    I'm not 100% sure,but if this port on Zero 4K is standard USB port.
    then maybe it is possible to make a flash if this port working.
    I think, docking converting from USB to Sata .

    However, if you broke the chip then it is possible that no USB is working.
    I do not understand how you (if you) broke the USB.
    There is no Jtag known to me.
     
  5. raboha

    raboha Vu+ Newbie

    Messages:
    20
    you mean is it possible The motherboard is lost or socket usb ?
     
  6. Thomas67

    Thomas67 Vip

    Messages:
    670
    Kit socket is a mini IDE/Sata Bridgeport so if you connect a modded usb cable and keep your fingers cross you might
    be able to flash through the port but most likely you will shortcut the bridge chip and kill some other chips along also

    You can attache a usb stick to the regular usb port and go to device manager and see if it locates the stick
    If no then you are in large trouble my friend.
     
  7. raboha

    raboha Vu+ Newbie

    Messages:
    20
    you mean that, I should take it to an expert or send it to the company for repair
     
  8. Thomas67

    Thomas67 Vip

    Messages:
    670
    Thats a good ide let an expert help you to check if the brick (Chip) is broken
    and maybe help you to do a full reflash if possible
     
  9. raboha

    raboha Vu+ Newbie

    Messages:
    20
    Thank you very much for your help brother
     
    Thomas67 likes this.
  10. okak24

    okak24 Vu+ Newbie

    Messages:
    13
    Hello my friend. I want thank you so much because want so much use disk in my vu Zero4k but don't want pay lot of money for dock. So after check your post i make one USB adapter and connected my portable disk. This working amazing and only left one thing to be complete. This is only first test but working amazing[​IMG]
     

    Attached Files:

    raboha likes this.
  11. PaPs

    PaPs Vu+ Newbie

    Messages:
    5
    Thanks, glad someone is using this :)

    Wysłane z mojego ONEPLUS A5000 przy użyciu Tapatalka
     
  12. raboha

    raboha Vu+ Newbie

    Messages:
    20
    have you work correctly with this idea ? is it usb 3.0 or 2.0 ?
     
  13. Alexwilmac

    Alexwilmac Vip

    Messages:
    5,768
    It's USB 5.0 ;)
     

Share This Page